Find A Dealer Find A Contractor

Saffro Epoxy 2k

Saffro Epoxy 2K is a tough, two-part epoxy grout that forms strong, waterproof, and stain-resistant joints. It works well for both narrow and wide joints, offering good durability with little upkeep—perfect for any tiling project.

Pack Size: 1 Kg, 5 Kg

Total Area (Sq. Mtr.)

Grout Joint Size

Length of Tile (mm)

Width of Tile (mm)

Thickness of Tile (mm)

Calculate Quantity

Total

0Kgs

Calculated quantity is an estimate. The on-site consumption may vary as per site conditions, surface roughness, and the method of application.

Features & Benefits

Simple mixing process with easy maintenance.
Dries quickly
Built for durability and high performance.
Stays clean and protected in tough conditions.
Waterproof & Consistent Color
Low VOC & Eco-Friendly
Temperature Resistant

Ideal For:

Vitrified and ceramic tiles
Granite and marble surfaces
Sleek thin slabs
Large-format tiles and intricate glass mosaics
Durable porcelain and stylish terrazzo tiles
Elegant natural stone

Application Areas

Moisture-prone areas
Water-submerged surfaces
Compatible with heated flooring
Hygienic spaces
Resistant to harsh chemicals
High-traffic areas
Suitable for homes and commercial spaces
Wide tile joints
Ideal for indoor and outdoor use

Application Guide

Pour Resin Paste (Part A) into a clean bucket, add Hardener (Part B), and mix for 2-3 minutes until smooth and uniform.
Scrape the sides and bottom of the container to check thorough blending.
Use a grout float to evenly spread the epoxy grout onto the tile surface.
Hold the float at a 45-degree angle and press grout firmly into the joints until fully filled.
Work in small sections to prevent the grout from drying too quickly.
Once applied, hold the float at a 90-degree angle and move diagonally across the tiles to remove excess grout.